Synergy Ford Super Duty HD Replacement Tie Rod Ends
Part #: TRE-FORD-REPLACEMENT
Weight: 3 lbs
Fitments:
TIE ROD END FITMENT TABLE
| Fitment | Description | Driver Side Tie Rod End | Driver Side Tie Rod End Boot | Passenger Side Tie Rod End | Passenger Side Tie Rod End Boot |
|---|---|---|---|---|---|
| 7500-01 | 99-04 Drag Link F-250/F-350 | 4152-L | 4153-DB | 4136-L | 4131-01 |
| 7502-01 | 99-04 Tie Rod F-250/F-350 | 4163-L | 4131-01 | 4167-L | 4131-01 |
| 7600-01 | 05+ Drag Link F-450/F550/F-600 | 4152-L | 4153-DB | 4153-L | 4153-DB |
| 7602-01 | 05+Tie Rod F-450/F550/F-600 | 4150-L | 4150-DB | 4151-L | 4151-DB |
| 8600-01 | 05+ Drag Link F-250/F-350 | 4152-L | 4152-DB | 4153-L | 4153-DB |
| 8602-01 | 05+ Tie Rod F-250/F-350 | 4151-L | 4151-DB | 4150-L | 4150-DB |
| 8675-01 | 05+ Track Bar | N/A | TBD | 4154-L | 4154-DB |
Note: The 4136-L, 4163-L, & 4167-L are used in Jeep & Ram applications as well. Please visit that page by clicking on the part numbers in this note or in the table above.
TIE ROD END SIZE TABLE
| Part # | Description | Thread | Taper | Style |
|---|---|---|---|---|
| 4150-L | HD TIE ROD END, FORD TIE ROD (PASSENGER SIDE) | 1-1/4-12 Left Hand | 1:6 TAPER (9.52 DEG INCL ANGLE) | Standard |
| 4151-L | HD TIE ROD END, FORD TIE ROD (DRIVER SIDE) | 1-1/4-12 Left Hand | 1:6 TAPER (9.5 DEG INCL ANGLE) | Single Plane |
| 4152-L | HD TIE ROD END, FORD DRAG LINK (DRIVER SIDE) | 1-14 Left Hand | 1:8 TAPER (7.10 DEG INCL ANGLE) | Standard |
| 4153-L | HD TIE ROD END, FORD DRAG LINK (PASSENGER SIDE) | 1-14 Left Hand | 1:6 TAPER (9.52 DEG INCL ANGLE) | Single Plane |
| 4154-L | HD TIE ROD END, FORD TRACK BAR (PASSENGER SIDE) | 1-14 Left Hand | 1:5 TAPER (11.30 DEG INCL ANGLE) | Standard |
| 4136-L | HD TIE ROD END, DODGE / FORD TIE ROD | 1-14 Left Hand | 1:8 TAPER (7.125 DEG INCL ANGLE) | Standard |
| 4163-L | HD TIE ROD END, JEEP / FORD TIE ROD | 1-14 Left Hand | 1:6 TAPER (9.5 DEG INCL ANGLE) | Standard |
| 4167-L | HD TIE ROD END, DODGE / FORD TIE ROD | 1-14 Left Hand | 1:6 TAPER (9.52 DEG INCL ANGLE) | Single Plane |
Features:
- Synergy Ford Super Duty HD Replacement Tie Rod Ends
- Fully greaseable sintered metal on metal bushing design has high wear resistance
- Specially designed grease grooves in the OD of the ball to allow for maximum lubrication
- Spring loaded bearing design keeps pressure on bearings and keeps the joint tight as it wears
- Forged bearing housing made from 1018 steel for a strong, smooth, bearing surface
- Tie Rod End stud made from 4140 steel with an induction heat treated bearing surface for smooth operation and maximum life
- Outperforms factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesn't neck down at base)
- Elimination of the nylon ball race to prevent premature ware
- Boots are made from tear/wear resistant black NBR and come with retaining springs.
- Includes all necessary hardware for installation
- Synergy High Performance Grease (4119) is the recommended grease for this product
- Zerk specs: DynaFlo 1/4'-28 straight steel zinc grease fittings with ball check
More information: www.p65warnings.ca.gov
