Synergy Jeep JL / JLU 2 Inch Lift Stage 1 Suspension System

Synergy Jeep JL / JLU 2 Inch Lift Stage 1 Suspension System

Part #: 88X1-2000
Weight: 107.4 lbs
  • MSRP: $2220.00
Purchase through our Dealer Network.
Northridge4x44 Wheel PartsQUADRATECExtreme Diesel Products
SDHQORW - Off Road WarehouseCJC OffroadFass MotorsportsDiesel Power Products

*Not all products are available from each dealer.
For a complete list, including international dealers, click here.

Part #DescriptionApplication
8821-2000Jeep JL / JLU 2 Inch Lift Stage 1 Suspension System2 Door
8841-2000Jeep JL / JLU 2 Inch Lift Stage 1 Suspension System4 Door

Fits: 2018+ Jeep Wrangler JL / JLU

Lift Height: 2 inches (Over Stock Rubicon)
Wheel Travel: Capable of 10.2 inches Front, 11 inches Rear (+2.7 inches front and +2.4 inches rear over stock Rubicon) when used with Synergy Tuned Shocks and optimal bump stop spacing (See shock fitment table at bottom of page for aftermarket options)
Tire Size: Up to 37-inch Rubicon, 35-inch non-Rubicon

Synergy MFG Suspension Systems use a synergistic approach, meaning the combined effect of the components is greater than the sum of the individual parts. The overall performance of the system is the most important factor when we are designing components to work together. Synergy MFG Suspension Systems are complete systems for your vehicle and include all necessary components for the lift height and performance advertised. All of these systems have shock solutions available, whether it be shock relocation brackets to continue using the stock shocks in our Starter System or one of our Synergy MFG tuned shock packages aimed at affordability or performance. Coil springs and shocks are two of the largest determining factors in ride quality and a mismatched system will never perform to its potential. All Synergy MFG tuned shocks are matched to the coil springs and application to provide the best ride and performance possible.

The Jeep JL Stage 1 Suspension System is a coil spring 2-inch lift designed around 37-inch tires for Rubicon models and 35-inch tires for non-Rubicon models. This system is based on the Starter System with the addition of some key upgrades allowing for increased wheel travel, drivability, and performance. For more complete 2-inch lift systems, see the Stage 2 systems.

Benefits:

  • Coil spring suspension system to easily fit larger tires
  • Corrects suspension geometry to center axles and fine tune alignment
  • Greatly improves wheel travel and articulation over stock and spacer lifts
  • Best in class ride quality and performance when paired with coil spring matched Synergy Tuned Shocks.
  • Includes all components necessary to get you on the trail
  • Complete Bolt-on System for easy install
  • Compatible with OEM wheels
  • No maintenance required for all included components
  • Lifetime Warranty on all hard parts
  • Fully upgradeable to higher level systems

Features:

  • Multi-rate, progressively wound coil springs increase lift height to 2 inches over stock. Front and rear coil springs are all new and have been designed specifically for the JL platform. Like OEM, the coil springs are unique lengths for each corner of the vehicle to compensate for weight distribution and prevent leaning. Longest in class free length prevents coil springs from coming unseated at full articulation and coil spring block height has been designed around optimal bump stop spacing for the lift height and tire size. Industry first closed and ground lower ends of the front coil springs ensure perfect fitment with the included front lower coil spring isolators. Our coil springs are guaranteed to resist bowing and have a lifetime guarantee against sagging/breakage.
  • Front and rear adjustable bump stop spacer kits are included to provide the necessary clearance required for larger tires. Bump stop spacing is adjustable from 2-4 inches in 1-inch increments without having to remove any hardware.
  • Stock rear sway bar links are relocated to the front and new rear sway bar links and drop brackets are added to the rear to allow full articulation of the rear suspension and maintain compatibility with stock wheels.
  • Front sway bar link relocation brackets paired with the stock rear sway bar links relocated to the front allows full articulation out of the front suspension.
  • Front adjustable lower control arms are included to correct caster and prevent the wandering sensation commonly associated with lifting a Jeep. These control arms feature our maintenance free Dual Durometer Bushings (DDB) focusing on performance, flex, longevity, and ride quality. Double adjuster assemblies are used for easy length adjustment on the vehicle and pinch bolts are used to secure the double adjusters so there's no fighting jam nuts.
  • Front adjustable track bar allows centering of the front axle and reduces flex in the front end.
  • Rear track bar relocation bracket raises the rear roll center to reduce body roll and centers the rear axle while preventing drive shaft interference with the gas tank which is possible with long travel shocks.
  • Parking brake cable bracket secures the parking brake cables when they are relocated under the rear crossmember so they don’t impede suspension travel.
  • Optional Synergy Tuned Shocks
  • Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance.
  • 100% bolt on components assure an easy, trouble free installation with the use of basic hand tools.

Improvements from the Synergy MFG Starter System:

  • Adds Front Lower Adjustable Control Arms to correct caster for the additional lift height
  • Adds Front Adjustable Track Bar to center the front axle
  • Adds Raised Rear Track Bar Relocation Bracket to reduce body roll and center the rear axle
  • Adds Parking Brake Cable Relocation Bracket to prevent the parking brake cables from limiting down travel
  • Optional Synergy Tuned Shock Package for increased wheel travel, handling, and comfort

Kit Includes:

8821-2000 - 2 Door Jeep JL / JLU8841-2000 - 4 Door Jeep JL / JLU
(1) 8863-10 Front Lift Coil Springs, 2-3 Inch Lift
(1) 8864-10 Rear Lift Coil Springs, 2-3 Inch Lift
(1) 8057-10 Snap-Lock Bump Stop Spacer System
(1) 8858-20 Rear Bumpstop Extension, 2.0 Tall
(1) 8860-11 Rear Sway Bar Links
(1) 8886-02 Rear Sway Bar Drop Brackets
(1) 8855-02 Front Sway Bar Link Relocation Brackets
(1) 8851-01 Adjustable Front Lower Control Arms
(1) 8875-01 HD Adjustable Front Track Bar
(1) 8856-01 Rear Track Bar Relocation Bracket
(1) 8818-01 Parking Brake Cable Relocation Bracket
(1) 8863-20 Front Lift Coil Springs, 2-3 Inch Lift
(1) 8864-20 Rear Lift Coil Springs, 2-3 Inch Lift
(1) 8057-10 Snap-Lock Bump Stop Spacer System
(1) 8858-20 Rear Bumpstop Extension, 2.0 Tall
(1) 8860-11 Rear Sway Bar Links
(1) 8886-02 Rear Sway Bar Drop Brackets
(1) 8855-02 Front Sway Bar Link Relocation Brackets
(1) 8851-01 Adjustable Front Lower Control Arms
(1) 8875-01 HD Adjustable Front Track Bar
(1) 8856-01 Rear Track Bar Relocation Bracket
(1) 8818-01 Parking Brake Cable Relocation Bracket

pdf-icon.gifInstallation Instructions

Notes:

  • Synergy MFG coil springs lift the vehicle the advertised height over stock based on a fully loaded JL Rubicon. Other JL models will see more lift over stock. These coil springs do not lift taller than advertised. The stock rake based off the Rubicon model is kept to retain its load carrying capacity. If you prefer the vehicle to sit level when unloaded, we recommend adding a small coil spacer to the front (up to 3/4 inch without affecting up travel or causing coil bind, 8017-075).
  • For off road use, the front sway bar can be disconnected on Rubicon vehicles via the built in electronic disconnect system. On non-Rubicon vehicles, we recommend the addition of our front sway bar disconnect kit, 8859-01.
  • Synergy is not responsible for maintaining finish of products. Environmental factors will affect rate of corrosion and wear for items advertised to be corrosion resistant. We recommend using protective coatings for all items that will see extended outdoor and off road use. We have had great experience with the Fluid Film product and recommend it and similar products for any items susceptible to damage from corrosion. It is great for keeping double adjuster assemblies working like new and protecting shock bodies from the elements.

Wheel and Tire Fitment:

Recommended tire size is limited by fender clearance. With higher clearance fenders or trimmed fenders, larger tires may be fitted. Bump stop spacing should be matched to the collapsed length of the shocks. Mismatched bump stop spacing and shocks will limit the available travel from the system.

Recommended tire size and wheel backspacing:

Wrangler ModelFendersWheel BackspacingTire SizeRecommended Bump Stop Spacing
RubiconUnmodified StockStock37 Inch3 Inch
RubiconUnmodified StockStock35 Inch2 Inch
RubiconUnmodified Stock4.5 Inch or less37 Inch4 Inch
RubiconUnmodified Stock4.5 Inch or less35 Inch3 Inch
RubiconTrimmed Stock or High ClearanceStock37 Inch2 Inch (Optimal)
RubiconTrimmed Stock or High ClearanceStock35 Inch2 Inch
RubiconTrimmed Stock or High Clearance4.5 Inch or less37 Inch3 Inch
RubiconTrimmed Stock or High Clearance4.5 Inch or less35 Inch2 Inch
Non-RubiconUnmodified StockStock35 Inch3 Inch
Non-RubiconUnmodified StockStock33 Inch2 Inch
Non-RubiconUnmodified Stock4.5 Inch or less35 Inch4 Inch
Non-RubiconUnmodified Stock4.5 Inch or less33 Inch3 Inch
Non-RubiconTrimmed Stock or High ClearanceStock35 Inch2 Inch (Optimal)
Non-RubiconTrimmed Stock or High ClearanceStock33 Inch2 Inch
Non-RubiconTrimmed Stock or High Clearance4.5 Inch or less35 Inch3 Inch
Non-RubiconTrimmed Stock or High Clearance4.5 Inch or less33 Inch2 Inch

These recommendations will result in no or very little rubbing at full articulation and steering. Some stock bumper configurations may require more trimming than others. Less than our recommended bump stop spacing can be run (up to 2 inches of bump stop spacing), but fenders and inner fenders will need to be trimmed for additional clearance.

Backspacing recommendations are based on wheel offset and wheel spacer combinations. With stock wheels, adding wheel spacers is equivalent to running 4.5 inches or less of backspacing.

Lift Height:

Wrangler ModelLift Height Over Stock
4 Door Rubicon2 Inches
4 Door SaharaTBD
4 Door SportTBD
2 Door Rubicon2 Inches
2 Door SaharaTBD
2 Door Sport2.75 Inches

Shock Fitment:


FrontRear
Fox 2.0" IFP985-24-179985-24-180
Fox 2.0" RR885-24-185985-24-186
Fox 2.5" DSC883-26-051 1883-26-055 1
Fox 3.0" IBP83-26-057 3883-26-058 3
King 2.5"25001-375 (A) 125001-376 (A) 1
Falcon 2.12-3"2-3"
Falcon 3.X2-4"0-1.5" 2

Notes: 
Recommended aftermarket shock fitment if not running Synergy Tuned Shocks.
1. May not be compatible with stock wheel backspacing for Non-Rubicon models.
2. Not recommended due to lack of down travel. Next size up shock is too long. It is possible to pair the shorter shocks with 8874-01 rear shock relocation brackets.
3. May not be compatible with stock wheel backspacing. Not recommended due to lack of downtravel.


    • SKU
      8821-2000
    • Weight
      107.4 lbs
  • Application
    2 Door, 4 Door

Related products

Footer navigation