Linear Wound Front Coil Spring

Synergy Jeep JK, TJ/LJ, XJ Front Lift Coil Springs

Part #: 8063-XX
Weight: 32 lbs
  • MSRP: $270.00
Purchase through our Dealer Network.
Northridge4x44 Wheel PartsQUADRATECExtreme Diesel Products
SDHQORW - Off Road WarehouseCJC OffroadFass MotorsportsDiesel Power Products

*Not all products are available from each dealer.
For a complete list, including international dealers, click here.

  • Front lift coils for 2-Door Jeep JK, TJ/LJ, XJ and 4-Door Jeep JK Wranglers
  • Synergy coils offer excellent off road performance while preserving ride quality
  • Progressively wound; keeps spring from coming unbound at suspension droop
  • Progressively wound spring eliminates annoying spring clanking found on most suspension kits
  • Feature frequency balanced and tuned spring rates to maximize suspension performance on and off road
  • Suspension components feature an abrasion-resistant black powder coat finish for maximum durability and corrosion resistance
  • Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches.
  • Sold in Pairs

Part #

Jeep XJ

Recommended Tire Size

Part #

Jeep TJ/LJ

Recommended Tire Size
Part #Jeep JKRecommended Tire Size
8063-102-Door Jeep JK 2.0" Front Lift Springs35" (37" w/ high fenders & proper bump stop spacers)
8063-202-Door Jeep JK 3.0" Front Lift Springs35" (37" w/ high fenders & proper bump stop spacers)
8063-302-Door Jeep JK 4.0" Front Lift Springs37" (40" w/ high fenders & proper bump stop spacers)
8063-452-Door Jeep JK 5.5" Front Lift Springs40" (42" w/ high fenders & proper bump stop spacers)
8063-602-Door Jeep JK 7.0" Front Lift Springs42" (44" w/ high fenders & proper bump stop spacers)
8063-104-Door Jeep JK 1.0" Front Lift Springs33" (35" w/ high fenders & proper bump stop spacers)
8063-204-Door Jeep JK 2.0" Front Lift Springs33" (35" w/ high fenders & proper bump stop spacers)
8063-304-Door Jeep JK 3.0" Front Lift Springs35" (37" w/ high fenders & proper bump stop spacers)
8063-454-Door Jeep JK 4.5" Front Lift Springs37" (40" w/ high fenders & proper bump stop spacers)
8063-604-Door Jeep JK 6.0" Front Lift Springs40" (42" w/ high fenders & proper bump stop spacers)
8063-10Jeep TJ/LJ 2.0" Front Lift Springs32" (33" w/ high fenders & proper bump stop spacers)
8063-20Jeep TJ/LJ 3.0" Front Lift Springs33" (35" w/ high fenders & proper bump stop spacers)
8063-30Jeep TJ/LJ 4.0" Front Lift Springs35" (37" w/ high fenders & proper bump stop spacers)
8063-45Jeep TJ/LJ 5.5" Front Lift Springs37" (38" w/ high fenders & proper bump stop spacers)
8063-60Jeep TJ/LJ 7.0" Front Lift Springs38" (40" w/ high fenders & proper bump stop spacers)
8063-20Jeep XJ 0.5 " Front Lift Springs31" (32" w/ high fenders & proper bump stop spacers)
8063-30Jeep XJ 1.5 " Front Lift Springs32" (33" w/ high fenders & proper bump stop spacers)
8063-45Jeep XJ 3.0 " Front Lift Springs33" (35" w/ high fenders & proper bump stop spacers)
8063-60Jeep XJ 4.5 " Front Lift Springs35" (37" w/ high fenders & proper bump stop spacers)


(2 DR JK)(4 DR JK)(INCHES)(INCHES)
Part #APPROXIMATE LIFT HEIGHTAPPROXIMATE LIFT HEIGHTSPRING TYPEFREE LENGTHBLOCK HEIGHT
8063-102.0"1.0"MULTI-RATE18.536.95
8063-203.0"2.0"MULTI-RATE19.536.95
8063-304.0"3.0"MULTI-RATE21.507.88
8063-455.5"4.5"MULTI-RATE22.008.60
8063-607.0"6.0"MULTI-RATE23.508.60

Notes:

  • 2012+ JK's lifted over 2" will require exhaust spacers (5017), or a front aftermarket drive shaft to prevent interference with the exhaust
  • Springs retain the factory rake of the vehicle where the rear is higher than the front. Vehicle should sit level when loaded. Request one size shorter rear springs to level the vehicle out when unloaded
  • Lift heights listed for JK are for models with gas engines. Expect approximately 1" less lift on diesel models.
  • Lift heights listed for TJ/LJ and XJ are for models with the 4.0L engine. Expect approximately 0.5"-1" more lift on 4 cylinder models.
  • For JK's with stock wheels or wheels with close to stock backspacing, 1-1/2" wheel spacers are recommended.
  • For JK's with 35" tires, 3" bump stop spacers are recommended. With high fenders, shorter bump stop spacers can be used.
  • For JK's with 37" tires, 4" bump stop spacers are recommended. With high fenders, shorter bump stop spacers can be used.
  • For 2 Door JK's with 5.5" of lift or more, the Synergy Long Arm System is recommended.
    • SKU
      8063-30
    • Weight
      30 lbs
  • Manufacturer
    Synergy Manufacturing
  • Part #
    8063-10, 8063-20, 8063-30, 8063-45, 8063-60

Related products

Footer navigation