HD Metal-on-Metal Tie Rod Ends

Synergy Jeep Heavy Duty Replacement Tie Rod Ends

Part #: 4131
Weight: 2 lbs
  • Price: $60.00
 
OR
  • Synergy Jeep Heavy Duty Replacement Tie Rod Ends
  • Fully greaseable sintered metal-on-metal bushing design has high wear resistance
  • Specially designed grease grooves in the OD of the ball to allow for maximum lubrication
  • Spring loaded bearing design keeps pressure on bearings and keeps the joint tight as it wears
  • Forged bearing housing made from 1018 steel for a strong, smooth, bearing surface
  • Tie Rod End stud made from 4140 steel with an induction heat treated bearing surface for smooth operation and maximum life
  • Single Plane tie rod ends offer misalignment in one direction of movement only. This eliminates drag link flop on the products they are designed for
  • Outperforms factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesn't neck down at base)
  • Elimination of the nylon ball race
  • Boots are made from tear/wear resistant black NBR and come with retaining springs
  • Includes all necessary hardware for installation
  • 7/8-18 UNF LH or RH Thread available

    • Synergy High Performance Grease (4119) is the recommended grease for this product
    • Zerk specs: DynaFlo 1/4'-28 straight steel zinc grease fittings with ball check


TIE ROD END FITMENT TABLE
FitmentDescriptionDriver Side
Tie Rod End
Passenger Side
Tie Rod End
Driver Side
Tie Rod End Boot
Passenger Side Tie
Rod End Boot
8000-01JK / JKU Drag Link4139-L4131-L4131-014131-01
8002-15JK / JKU Tie Rod4139-L4131-L4131-014131-01
8121-01TJ / LJ / XJ / ZJ / MJ Tie Rod4135-L (Either side)4135-R (Either side)4131-014131-01
8121-02TJ / LJ / XJ / ZJ / MJ Drag Link4135-L4137-L4131-014131-01
8800-01JL / JLU / JT Drag Link4162-L4163-L4131-014131-01
8802-01JL / JLU / JT Tie Rod4163-L4164-L4131-014131-01


TIE ROD END SIZE TABLE
Part #DescriptionThreadTaperStyle
4131-LHD Tie Rod End, Left Hand Thread for JK's7/8-18 Left Hand1:8 Taper (7.125 DEG INCL ANGLE)Standard
4131-RHD Tie Rod End, Right Hand Thread for JK's7/8-18 Right Hand1:8 Taper (7.125 DEG INCL ANGLE)Standard
4135-LHD Tie Rod End, Left Hand Thread for TJ/XJ/ZJ's7/8-18 Left Hand1:8 Taper (7.125 DEG INCL ANGLE)Standard
4135-RHD Tie Rod End, Right Hand Thread for TJ/XJ/ZJ's7/8-18 Right Hand1:8 Taper (7.125 DEG INCL ANGLE)Standard
4137-LHD Tie Rod End, Left Hand Thread for TJ/XJ/ZJ's7/8-18 Left Hand1:8 Taper (7.125 DEG INCL ANGLE)Single Plane
4139-LHD Tie Rod End, Left Hand Thread for JK's7/8-18 Left Hand1:8 Taper (7.125 DEG INCL ANGLE)Single Plane
4161-LHD Tie Rod End, Left Hand Thread for JL1-14 Left Hand1:6 Taper (9.5 DEG INCL ANGLE)Single Plane
4162-LHD Tie Rod End, Left Hand Thread for JL / JT Drag Link1-14 Left Hand1:8 Taper (7.125 DEG INCL ANGLE)Single Plane
4163-LHD Tie Rod End, Left Hand Thread for JL / JT Drag Link and Tie Rod1-14 Left Hand1:6 Taper (9.5 DEG INCL ANGLE)Standard
4164-LHD Tie Rod End, Left Hand Thread for JL / JT Tie Rod1-14 Left Hand1:6 Taper (9.5 DEG INCL ANGLE)Single Plane
4166-LConversion Tie Rod End (Pitman side). Adapts 8000-01 Drag Link for
JL / JT with Ultimate Dana 60 axle housings only.
7/8-18 Left Hand1:8 Taper (7.125 DEG INCL ANGLE)Single Plane



4131 Exploded View
413X Exploded View
Comparison
Comparison
GM 1 Ton Replacement w/ Nylon Bushing
GM 1 Ton Replacement w/ Nylon Bushing
    • SKU
      4131-L
    • Weight
      2 lbs
  • Manufacturer
    Synergy Manufacturing
  • Part #
    4131-L, 4131-R, 4135-L, 4135-R, 4137-L, 4139-L, 4162-L, 4163-L, 4164-L, 4166-L

Related products

Footer navigation