Front Upper Control Arm

Synergy 1994-2013 Dodge Ram 1500 / 2500 / 3500 Front Upper Control Arm Pair

SKU: 8553-01
Part #: 8553-01
Weight: 23 lbs
  • MSRP: $450.00
Purchase through our Dealer Network.
Northridge4x44 Wheel PartsQUADRATECExtreme Diesel Products
SDHQORW - Off Road WarehouseCJC OffroadFass MotorsportsDiesel Power Products

*Not all products are available from each dealer.
For a complete list, including international dealers, click here.

Synergy Adjustable Front Upper Control Arms are a Heavy Duty upgrade for the stock Dodge Ram control arms. They are adjustable to allow for caster correction and re-centering of the front axle housing for oversize tires and increased ride heights. Our Double Adjuster Assembly allows adjustment of control arm length without removing them from the vehicle and uses a pinch bolt instead of jam nut for ease of use and reliability. Maintenance Free Dual Durometer Bushings are used at both ends for uncompromised articulation and isolation of Noise, Vibration, and Harshness

Fitments:

  • 1994-1999 1500 4x4 2500 / 3500 *Requires 9/16'' hole to be drilled in mount
  • 1999-2001 1500 4x4
  • 2006-2008 Dodge Ram 1500 Mega cab 4x4
  • 1994-2013 Dodge Ram 2500 / 3500 4x4
  • Warning: 2013 Dodge Ram 3500's were a split year for production. If your truck has radius arms use Dodge Ram 2014+ pages

Benefits:

  • Stronger than stock
  • Lighter than comparable offerings
  • Increases articulation
  • Maintenance Free, no greasing required
  • Isolates Noise, Vibration, and Harshness increasing ride quality
  • Adjustable to accommodate oversize tires and increased ride heights
  • Adjustable without removing from vehicle
  • No jam nuts that are impossible to keep tight
  • No modifications required to install
  • Limited Lifetime Warranty

Features:

  • Made from high quality crush resistant 1 1/2" X .156" Wall 1026 DOM tubing
  • Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
  • Synergy Double Adjuster Sleeve & Pinch Bolt Assembly: allows for adjustment of control arm length without removing control arm mounting bolt
  • Features Synergy Dual Durometer Bushings (DDB) with Teflon® bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
  • 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
  • Sold in pairs

Min/Max Lengths:


Measured in a straight line from center of bolt hole to center of bolt hole

  • Max extended length: 18.250"
  • Min collapsed length: 16.500"

Includes:

  • (2) Heavy Duty Adjustable Front Upper Control Arms
  • (2) Pinch Bolts and Hardware

Notes:

  • Requires drilling of mounts to 9/16'' on 1994-1999 models

Installation Instructions


Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
    • SKU
      8553-01
    • Weight
      23 lbs
  • Manufacturer
    Synergy Manufacturing

Related products

Footer navigation