Synergy Dodge Ram Heavy Duty Replacement Tie Rod Ends

Synergy Dodge Ram Heavy Duty Replacement Tie Rod Ends

Part #: TRE-RAM-REPLACEMENT
Weight: 3 lbs
  • Price: $60.00
 
OR
  • Synergy Dodge Ram Heavy Duty Replacement Tie Rod Ends
  • Fully greaseable sintered metal on metal bushing design has high wear resistance
  • Specially designed grease grooves in the OD of the ball to allow for maximum lubrication
  • Spring loaded bearing design keeps pressure on bearings and keeps the joint tight as it wears
  • Forged bearing housing made from 1018 steel for a strong, smooth, bearing surface
  • Tie Rod End stud made from 4140 steel with an induction heat treated bearing surface for smooth operation and maximum life
  • Outperforms factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesn't neck down at base)
  • Elimination of the nylon ball race
  • Boots are made from tear/wear resistant black NBR and come with retaining springs. (4133-L, 4136-L, 4138-L, and 4160-L only. 4134-L low misalignment boot available separately, 4134-02)
  • Includes all necessary hardware for installation
  • 1-14 UNF LH Thread
  • Synergy High Performance Grease (4119) is the recommended grease for this product
  • Zerk specs: DynaFlo 1/4'-28 straight steel zinc grease fittings with ball check
  • Fits:  94-current Dodge Ram trucks with Synergy 8525 or 8725 Steering


TIE ROD END FITMENT TABLE
FitmentDescriptionDriver Side
Tie Rod End
Passenger Side
Tie Rod End
Drivers Side
Tie Rod End
Boot
Passenger Side
Tie Rod End
Boot
8567-1394-99 Drag Link4136-L4160-L4131-014131-01
8568-0394-99 Tie Rod4136-L4136-L4134-024134-02
8567-1200-02 Drag Link4133-L4160-L4131-014131-01
8568-0200-02 Tie rod4134-L4134-L4134-024134-02
8567-1103-13 Drag Link4133-L4160-L4131-014131-01
8568-2103-13 Tie Rod4134-L4167-L4131-014131-01
8701-0114+ Drag Link4160-L4134-L4131-014131-01
8702-0114+ Tie Rod4138-L4138-L4134-024134-02


TIE ROD END SIZE TABLE
Part #DescriptionThreadTaperStyle
4133-LHD TIE ROD END, DODGE DRAGLINK1-14 Left Hand1:8 TAPER (7.125 DEG INCL ANGLE)Standard
4134-LHD TIE ROD END, DODGE TIE ROD1-14 Left Hand1:6 TAPER (9.5 DEG INCL ANGLE)Standard
4136-LHD TIE ROD END, DODGE TIE ROD1-14 Left Hand1:8 TAPER (7.125 DEG INCL ANGLE)Standard
4138-LHD TIE ROD END, DODGE TIE ROD1 1/4-12 Left Hand1:6 TAPER (9.52 DEG INCL ANGLE)Standard
4160-LHD TIE ROD END, DODGE DRAG LINK1-14 Left Hand1:8 TAPER (7.155 DEG INCL ANGLE)Single Plane
4167-LHD TIE ROD END, DODGE TIE ROD1-14 Left Hand1:6 TAPER (9.52 DEG INCL ANGLE)Single Plane


Notes: 

  • If upgrading to 4167-L for 03-13 Tie Rod - No Misalignment Caps (4134-02) are needed 
  • Part numbers 4134-L and 4136-L use HD tie rod low misalignment boot and caps - 4134-02 
4131 Exploded View
413X Exploded View
Comparison
Comparison
GM 1 Ton Replacement w/ Nylon Bushing
GM 1 Ton Replacement w/ Nylon Bushing
    • SKU
      4133-L
    • Weight
      3 lbs
  • Manufacturer
    Synergy Manufacturing
  • Part #
    4133-L, 4134-L, 4136-L, 4138-L, 4160-L, 4167-L

Related products

Footer navigation