Synergy Dodge Ram Heavy Duty Replacement Tie Rod Ends

Part #: TRE-RAM-REPLACEMENT

Weight: 3 lbs

Description

Synergy Dodge Ram Heavy Duty Replacement Tie Rod Ends
Fully greaseable sintered metal on metal bushing design has high wear resistance
Specially designed grease grooves in the OD of the ball to allow for maximum lubrication
Spring loaded bearing design keeps pressure on bearings and keeps the joint tight as it wears
Forged bearing housing made from 1018 steel for a strong, smooth, bearing surface
Tie Rod End stud made from 4140 steel with an induction heat treated bearing surface for smooth operation and maximum life
Outperforms the factory and all other aftermarket style tie rod ends by offering: A larger shank with no stress riser (doesn't neck down at base), Elimination of the nylon ball race
Boots are made from tear/wear resistant black NBR and come with retaining springs. (4133-L, 4136-L, 4138-L, and 4160-L only. 4134-L low misalignment boot available separately, 4134-02)
Includes all necessary hardware for installation
1-14 UNF LH Thread
Synergy High Performance Grease (4119) is the recommended grease for this product
Fits: 94-current Dodge Ram trucks with Synergy 8525 or 8725 Steering

Part #	Description	Thread	Taper	Style
4133-L	HD TIE ROD END, DODGE DRAGLINK	1-14 Left Hand	1:8 TAPER (7.125 DEG INCL ANGLE)	Standard
4134-L	HD TIE ROD END, DODGE TIE ROD	1-14 Left Hand	1:6 TAPER (9.5 DEG INCL ANGLE)	Standard
4136-L	HD TIE ROD END, DODGE TIE ROD	1-14 Left Hand	1:8 TAPER (7.125 DEG INCL ANGLE)	Standard
4138-L	HD TIE ROD END, DODGE TIE ROD	1 1/4-12 Left Hand	1:6 TAPER (9.52 DEG INCL ANGLE)	Standard
4160-L	HD TIE ROD END, DODGE DRAG LINK	1-14 Left Hand	1:8 TAPER (7.155 DEG INCL ANGLE)	Single Plane
4134-02	HD TIE ROD END LOW MISALIGNMENT BOOT AND CAP FOR 4134-L and 4136-L TIE ROD ENDS	-	-	-

Tie Rod End Fitment Table

Fitment	Description	Driver Side Tie Rod End	Driver Side Tie Rod End Boot	Passenger Side Tie Rod End	Passenger Side Tie Rod End Boot
8567-01	03-13 Drag Link	4133-L	4131-01	4160-L	4131-01
8567-02	00-02 Drag Link	4133-L	4131-01	4160-L	4131-01
8567-03	94-99 Drag Link	4136-L	4131-01	4160-L	4131-01
8567-11	03-13 Drag Link	4133-L	4131-01	4160-L	4131-01
8567-12	00-02 Drag Link	4133-L	4131-01	4160-L	4131-01
8567-13	94-99 Drag Link	4136-L	4131-01	4160-L	4131-01
8568-01	03-13 Tie Rod	4134-L	4134-02	4134-L	4134-02
8568-02	00-02 Tie rod	4134-L	4134-02	4134-L	4134-02
8568-03	94-99 Tie Rod	4136-L	4134-02	4136-L	4134-02
8701-01	14+ Drag Link	4160-L	4131-01	4134-L	4131-01
8702-01	14+ Tie Rod	4138-L	4134-02	4138-L	4134-02

413X Exploded View

Comparison

GM 1 Ton Replacement w/ Nylon Bushing

WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle.
For more information go to www.P65Warnings.ca.gov