Synergy 2014+ Ram 2500 Heavy Duty Rear Adjustable Track Bar

Part #: 8765-01

Weight: 15.58 lbs

Description

Synergy 2014+ Ram 2500 Heavy Duty Rear Adjustable track Bar in a must have when lifting the rear of your Ram 2500. The adjustable rear track bar centers your rear axle when running a suspension lift. It is considerably stronger than stock to hold up to the abuse of large tires and aggressive off road driving. The length is adjustable on the vehicle to make changes in geometry and alignment a breeze. The track bar features maintenance free Synergy Dual Durometer Bushings on both ends to allow the suspension to articulate to its full potential. The bar is bent to clear most aftermarket differential covers. This track bar must be used in conjunction with either a Synergy track bar relocation bracket (8740) or Synergy brake line relocation bracket (8765-01) for best fitment.

Benefits:

Allows centering of rear axle when running from 0 to 4.5 inches of lift
Adjustable without removing from vehicle
Abrasion-resistant powder coat finish for maximum durability and corrosion resistance
Maintenance Free, no greasing required
Synergy Dual Durometer Bushings eliminate binding issues associated with stock vulcanized bushings
No jam nuts that are impossible to keep tight
No modifications required to install
Isolates Noise, Vibration, and Harshness (NVH) increasing ride quality
Bent to clear most aftermarket differential covers with no additional lift height required
Limited Lifetime Warranty

Features:

Made from high quality 1.50 inch x .250 wall DOM
Retains factory track bar mounting bolts & hardware
Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing mounting bolt
Features Synergy Dual Durometer Bushings (DDB) with Teflon® bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
100 percent bolt-on components assures an easy, trouble free installation with the use of basic hand tools

Min/Max Length:

Measured in straight line from center of bolt hole to center of bolt hole

Includes:

(1) Grade 8 Pinch Bolts & Hardware
(1) Synergy Double Adjuster Sleeve
(1) Synergy Ram 2014+ Heavy Duty Track Bar

Notes:

The Synergy Rear Adjustable Track Bar needs to be installed with one of the following for correct fitment:
- Synergy track bar relocation bracket (8740)
- Synergy brake line relocation bracket (8765-02)
When running more than 4.5 inches of lift, use this part with Synergy Rear Track Bar Relocation 8740-01 (for up to 7" of lift)

Installation Instructions

WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle.
For more information go to www.P65Warnings.ca.gov