Ram Truck Heavy Duty Tie Rod w/ Optional Stabilizer Bracket & Fox IFP Stabilizer

Synergy 13+ Ram Truck Heavy Duty Tie Rod

Part #: 8702-01

Weight: 24.55 lbs

Description

Ram Heavy Duty Tie Rod. All new design and components specific to the new radius arm Ram Truck platform. Direct bolt-in replacement for the stock tie rod for an immediate upgrade in steering feel and strength. No wheel size requirements! Can be installed on a stock Ram with stock wheels and tires. Tie rod is made from heat treated chromoly for maximum strength. Low misalignment dust boots eliminate tie rod flop. You will not find a better tie rod on the market!

Fits:

RAM Truck 14+ 2500 4x4, 13+ 3500 4x4, 14+ Power Wagon
Warning: 2013 Dodge Ram 3500's were a split year for production. The early model trucks use the T-style steering (drag link is attached to the Tie Rod), Synergy Part # 8525-01. The late model trucks use cross over steering (Drag link is attached to the knuckle and does not attach to the Tie Rod), Synergy Part # 8725-01. Please check what style you have before ordering.

Benefits:

Improves strength and steering feel and eliminates any chance of bending.
Offers a more direct connection to the road compared to stock; no more bent tie rods and constantly having to align your vehicle.
Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock and include grease fittings/replaceable dust boots for ease of maintenance.
Synergy High Performance Grease recommended (4119).
Eliminates unwanted tie rod flop and the steering deadspot commonly encountered with hydro assist setups.
Tie rod length adjustable on the vehicle.
Compatible with stock wheels and tires.

Technical Features:

Over 40% stronger than the stock tie rod.
Tie Rod bolts right into the factory mounts with no additional wheel requirements.
No factory tie rod components need to be reused.
Includes Synergy HD Metal on Metal Tie Rod Ends with oversized 1 1/4 inch shank.
Low Misalignment tie rod end boots are used to prevent unwanted tie rod flop. Eliminates the steering dead spot commonly associated with hydro assist setups.
Tie Rod is CNC formed from 1.75 inch x .188 wall seamless chromoly tubing and heat treated after forming.
Abrasion-resistant powder coat finish for maximum durability and corrosion resistance.
Synergy Double Adjuster Sleeve allows adjustment of tie rod length without removing it from the vehicle.
Both ends of the bar use pinch bolts instead of jam nuts to simplify installation and adjustment.
Tie Rod has an outer diameter (OD) of 1.75 inches and must be used with our steering stabilizer clamp.
100% bolt-on components assures an easy, trouble free installation with the use of basic hand tools.

Installation Instructions

Notes:

Steering Stabilizer Clamp 8703-01 required to retain steering stabilizer
Replacement Tie Rod Ends: 4138-L (2x)
Replacement Tie Rod End Low Misalignment Boots: 4134-02 (2x)
Min collapsed length: 60.00 inches
Max extended length: 62.75 inches

WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle.
For more information go to www.P65Warnings.ca.gov