Synergy 2005 + Ford Super Duty F-250 / F-350 / F-450 / F-550 / F-600 Heavy Duty Adjustable Front Track Bar
Our Synergy 2005+ Ford Super Duty F-250 / F-350 / F-450 / F-550 / F-600 Heavy Duty Adjustable Front Track Bar is a critical final component to your new suspension lift and steering upgrade. Manufactured from 1.75" USA made DOM steel, this track bar significantly improves lateral stiffness over stock and is considerably stronger to hold up to the abuse of large tires and aggressive off road driving.
With our Double Adjuster Sleeve and Pinch Bolt Assembly, this track bar is fully adjustable while installed in the vehicle making fine-tuning a breeze! Centering your axle after installing a suspension lift is critical to correcting your suspension and steering geometry, ensuring ideal vehicle handling and a safe ride. Pair this adjustable track bar with Synergy's Heavy Duty Drag Link and Tie Rod to bulletproof your steering and guarantee product compatibility from stock height to 4 inches of lift.
Fitments:
Part # | Fitment |
---|---|
7675-01 | 2005 - 2016 Ford Super Duty F-250 / F-350 2005+ Ford Super Duty F-450 / F-550 / F-600 |
7675-02 | 2017+ Ford Super Duty F-250 / F-350 |
Benefits:
- Heavy duty 1.75" x 0.188 wall USA made DOM offers improved strength over stock and provides a stronger connection to the road, preventing unwanted vehicle wandering and unnecessary axle movement
- Centers the axle after installing a suspension lift to ensure proper suspension geometry, smooth handling, and consistent tire wear
- Maintenance free Synergy Dual Durometer Bushings isolate noise and vibrations to provide a quiet, smooth ride
- Fully adjustable without removing from the vehicle with our Synergy Double Adjuster Sleeve and Pinch Bolt Assembly
- Synergy metal on metal HD axle side ball joint (applicable to 2017+ models) offers a solid connection to the axle and isolates any unwanted play or vibrations
- No jam nuts that are impossible to keep tight
- Compatible with stock steering components, wheels and tires
- Bolts right to factory mounting locations with no modification necessary
Features:
- Engineered and precision bent from USA made 1.75" x 0.188 wall DOM tubing for maximum strength
- Two stage abrasion resistant powder coat finish for maximum durability and corrosion resistance
- Retains factory mounting locations and mounting hardware
- Synergy Dual Durometer Bushings with Teflon Bearing surface for a maintenance free design focusing on performance, articulation, longevity, and ride quality
- Synergy Double Adjuster Sleeve and Pinch Bolt Assembly eliminates jam nuts and allows for easy adjustability
- Synergy Heavy Duty Metal on Metal Duty Ball Joint applicable to 2017+ models
- 100% bolt-in components assures and easy, trouble free installation with the use of basic hand tools
Min/Max Length:
Measured in a straight line from center of bolt hole to center of bolt hole
- Min collapsed length: 36.375"
- Max extended length: 37.75"
Includes:
7675-01 | 7675-02 |
(1) Synergy Heavy Duty Track Bar (1)3622-12-12-PL - Double Adjuster Sleeve (1) 4327-02 - Dual Durometer Track Bar Bushing (1) 7675-10 - Super Duty Slug Adapter | (1) Synergy Heavy Duty Track Bar (1) 3622-12-12-PL - Double Adjuster Sleeve (1) 4327-02 - Dual Durometer Track Bar Bushing (1) 7675-11 - Super Duty Track Bar Heavy Duty Ball Joint |
Notes:
- Compatible on vehicles up to 4" ride height
- Compatible with both our Synergy Heavy Duty Steering Kit and the stock Super Duty steering components
- Synergy High Performance Grease recommended
- Compatibility not guaranteed on all aftermarket diff covers
- If your track bar was built before 10/2024 part number 8675-01, please refer to part number 4154-L for a replacement tie rod end
