Synergy Jeep JL / JLU HD Adjustable Rear Track Bar

Synergy Jeep JL / JLU HD Adjustable Rear Track Bar

SKU: 8862-01
Part #: 8862-01
Weight: 14 lbs
  • MSRP: $330.00
Purchase through our Dealer Network.
Northridge4x44 Wheel PartsQUADRATECExtreme Diesel Products
SDHQORW - Off Road WarehouseCJC OffroadFass MotorsportsDiesel Power Products

*Not all products are available from each dealer.
For a complete list, including international dealers, click here.

Jeep Wrangler JL / JLU Heavy Duty Adjustable Rear Track Bar. Adjustable track bars are used to help center your axles when running a suspension lift. Considerably stronger than stock to hold up to the abuse of large tires and aggressive off road driving. Length is adjustable on the vehicle to make adjustments a breeze. Uses maintenance free Synergy Dual Durometer Bushings on both ends. Bent to clear most aftermarket differential covers.

Fitments: 

  • 2018+ Jeep Wrangler JL / JLU

Features:

  • Made from high quality 1.50 inch x .250 wall DOM
  • Retains factory track bar mounting bolts & hardware
  • Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
  • Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing mounting bolt
  • Features Synergy Dual Durometer Bushings (DDB) with Teflon® bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
  • 100 percent bolt-on components assures an easy, trouble free installation with the use of basic hand tools

Benefits:

  • Allows centering of rear axle when running a suspension lift
  • Adjustable without removing from vehicle
  • Maintenance Free, no greasing required
  • Synergy Dual Durometer Bushings eliminate binding issues associated with stock vulcanized bushings
  • No jam nuts that are impossible to keep tight
  • No modifications required to install
  • Isolates Noise, Vibration, and Harshness (NVH) increasing ride quality
  • Bent to clear most aftermarket differential covers
  • Limited Lifetime Warranty

Min/Max Length:

Measured in straight line from center of bolt hole to center of bolt hole 

  • Min collapsed length: 37.375"
  • Max extended length: 38.375"

Notes:

  • Synergy MFG 8856-01 Rear Track Bar Relocation Bracket recommended for lifts 2 inches and taller and requires a minimum 2 inches of bump stop spacing
  • Track Bar is compatible with 0-4 inches of lift. If using Synergy MFG 8856-01 Rear Track Bar Relocation Bracket this track bar can be used 0-6 inches of lift.
  • The replacement adjustable joint is 4811-01 and the replacement bushings are 4327-01

Installation Instructions


Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
    • SKU
      8862-01
    • Weight
      14 lbs

Related products

Footer navigation