Synergy Jeep JK Complete UCA, LCA & Track Bar Hardware Kit

Features:

• High strength hardware
• Replaces the Lower Control Arm (LCA) & Upper Control Arm (UCA) hardware and specialized nut tabs that get destroyed from wheeling abuse
• Replaces the Rear Track Bar (TB) bolts which often get worn out from service
• Replaces the Front Track Bar Frame Side (TB) bolt on 2012+ JK with a 14mm bolt
• Includes hardened extra thick washers that will not deform or contort like standard washers

Complete Kit Includes:

(1) Lower Control Arm & Track Bar Hardware Kit (8050)

• (8) 9/16-18 UNF x 4.0" long bolts (LCAs)
• (4) 9/16-18 UNF x 3.0" long bolts (TBs)
• (12) 9/16-18 UNF Stover top lock nuts
• (24) 9/16" Extra Thick hardened flat washers
• (1) M14-2.0 x 80mm bolt (2012+ Front Frame Side Track Bar Bracket)
• (1) M14-2.0 Stover top lock nut

(1) Upper Control Arm Hardware Kit (8050-01)

• (4) 9/16-18 UNF x 3.50" long bolts (RUCAs)
• (4) M12 X 1.50 85MM (3.50") long bolts (FUCAs)
• (4) M12 x 1.50 Stover top lock nuts
• (4) 9/16" Extra Thick hardened flat washers
• (8) 1/2" Extra Thick hardened flat washers
• (2) Rear Upper Control Arm Nut Tab, Frame Side
• (2) Rear Upper Control Arm Nut Tab, Axle Side

Installation Instructions

More information: www.p65warnings.ca.gov