Synergy Jeep JT Gladiator Rear Lift Coil Springs

Synergy Jeep JT Gladiator Rear Lift Coil Springs

Part #: 8865-XX
Weight: 55 lbs
  • MSRP: $325.00
Purchase through our Dealer Network.
Northridge4x44 Wheel PartsQUADRATECExtreme Diesel Products
SDHQORW - Off Road WarehouseCJC OffroadFass MotorsportsDiesel Power Products

*Not all products are available from each dealer.
For a complete list, including international dealers, click here.

Synergy Jeep JT Multi-Rate Rear Lift Coil Springs. Synergy has designed these springs from a clean sheet for the new Gladiator platform. All springs are multi-rate and have been designed to make a great platform even better. These springs are unique to the JT and not shared with any other vehicles. Multi-rate design has a soft initial rate which prevents the spring from coming loose, even with long travel shocks. The ride rate is the average of the OEM spring rates to maintain adequate payload and towing capacity. Springs are proudly manufactured in the United States of the highest quality steel. Springs are designed to be able to set solid (fully collapse) without overstressing the material and are pre-set from the factory meaning the springs will never sag or set.

Benefits:

  • Increased ride quality
  • Increased wheel travel/articulation/traction
  • No spring bowing
  • Lifetime warranty/guarantee against sagging and breakage

Features:

  • Multi-Rate coil springs allow for longer spring lengths and increased travel
  • Spring rates are similar to stock to maintain payload and towing capacity
  • Coil spring block heights designed around common bump stop spacings to optimize wheel travel
  • Frequency balanced and tuned spring rates to maximize suspension performance on and off road
  • Abrasion-resistant black powder coat finish for maximum durability and corrosion resistance
  • Sold in pairs

Includes:

  • (2) Rear Coil Springs

Notes:

  • Coil springs require proper bump stop spacing with Synergy 8057-10 Bump Stop Spacers.
  • Lift heights are based off fully optioned Rubicon models. Other models will see more lift.
  • Coil springs retain the stock rake of the vehicle.
  • Up to .75 inch of front coil spring spacer can be added to level the vehicle using 8017-075 front coil spring spacers.
  • Minimum bump stop spacing listed is the minimum amount of bump stop spacing required to prevent the springs from going into coil bind. Do not use less bump stop spacing.
Part #Lift HeightSpring Rate (Initial/Ride Rate)Collapsed LengthExtended LengthMin. Bump Stop Spacing
8865-101”165/250 lb/in7.89"19.375"0"
8865-202”165/250 lb/in7.89”20.375”2”
8865-303”165/250 lb/in7.89”21.375”2”
8865-404"165/250 lb/in9.46"22.375"2”
8865-505”165/250 lb/in
9.5"23.375"2"
8865-606”165/250 lb/in
9.5"23.375"2"


Ride Height Chart for Jeep JT Models:

  • Note: Measurement is over stock height for that particular model
  • Lift heights are based off fully loaded Rubicon models with HD front and rear bumpers and winch
Spring Part NumberJeep JT Sport
Jeep JT Rubicon
Jeep JT Diesel Motor
Jeep JT Mojave
8863-101"1"-1"-1"
8863-202"2"0"0"
8863-303"3"1"1"
8863-404"4"2"2"
8863-505"5"3"3"
8863-606"6"4"4"


Installation Instructions

    • SKU
      8865-10
    • Weight
      55 lbs
  • Part #
    8865-10, 8865-20, 8865-30, 8865-40, 8865-50, 8865-60

Related products

Footer navigation