FOX ATS Steering Stabilizers

Part #: FOX-ATS-STABILIZERS

Weight: 5 lbs

Description

The FOX Performance Series Adjustable Through Shaft (ATS) steering stabilizer offers unrivaled steering control and a striking high tech appearance. The technologically advanced design cancels unwanted steering forces in both directions, taking the place of two conventional opposing stabilizers. It will also respond to your input with 24 clicks of external adjustment to fine tune the feel. The integrated reservoir allows for additional fluid capacity and improves cooling during extreme use. Also included is FOX's relocating hardware that moves the steering stabilizer up and out of the way utilizing a new track bar relocation bolt and tie-rod mounting clamp. The ATS represents a revolutionary breakthrough in stabilizer design.

Specifications:

Body - Aluminum shock body dissipates heat three times faster than steel
Components - Black anodized 6061-T6 billet aluminum
Shaft - 5/8" hard chrome plated heat treated alloy steel
Piston - Race-developed high-flow piston design
Valving - Proprietary deburred valve shims
Seals - Redundant sealing pack system main seal, wiper seal, scraper seal
Oil - Specially formulated for ultimate performance at variable temperatures
Reservoir - External reservoir design separates shock oil from the high-pressure nitrogen
Mounting - Applications available for stock and aftermarket lifts kits

Adjustments:

Nitrogen Pressure Adjuster
24 Clicks of Adjustability

Jeep JK / JL / JT Applications:

Application	Fox Part Number	Clamp Size	Collapsed Length	Extended Length	Travel
JK Stock Tie Rod	983-02-145	1-3/8"	14.06"	22.15"	8.1"
JK Synergy Tie Rod	983-02-142	1-1/2"	14.06"	22.15"	8.1"
JK Aftermarket Tie Rod	983-02-146	1-5/8"	14.06"	22.15"	8.1"
JL / JT Stock axle mount position	983-02-148	N/A	15.1"	23.2"	8.1"
JL / JT Synergy Tie Rod in Flipped Position	983-02-142	1-1/2"	14.06"	22.15"	8.1"
JL / JT Stock Tie Rod in Flipped Position	983-02-146	1-5/8"	14.06"	22.15"	8.1"

Dodge Ram 1500 / 2500 / 3500 Applications:

Application	Fox Part Number	Clamp Size	Collapsed Length	Extended Length	Travel
2009-2013 Ram Stock Tie Rod	983-02-147	1-5/8"	14.06"	22.15"	8.1"
1994-2013 Ram Synergy Tie Rod	983-02-142	1-1/2"	14.06"	22.15"	8.1"
2014+ Ram Stock Tie Rod	983-02-158	N/A	15.1"	23.3"	8.2"
2014+ Ram Synergy Tie Rod* Requires use of 4050-75	983-02-158	N/A	15.1"	23.3"	8.2"

*When running a dual stabilizer configuration you can use any Fox ATS stabilizers with (2) Synergy ATS clamp Adapters 4051-01

Ford Super Duty F-250 / F-350 Applications:

Application	Fox Part Number	Clamp Size	Collapsed Length	Extended Length	Travel
2005+ Synergy and Stock Drag Link	983-02-143	1-5"	16.67"	24.78"	8.11"

Note: If installing stabilizer on 2012 and newer model with stock suspension or with less than a 2.5'' lift and aftermarket 1-1/4'' bump stop extension, the stabilizer reservoir must be rotated for clearance. Loosen pinch bolt on L-bracket between stabilizer and track bar clamp, rotate reservoir approximately 135 degrees down and toward rear of vehicle.

Installation Instructions

WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle.
For more information go to www.P65Warnings.ca.gov