Synergy 2014+ Ram 2500 Heavy Duty Rear Adjustable Track Bar

Our Synergy Ram 2014+ 2500 4x4 Heavy Duty Adjustable Rear Track Bar is a critical component to correcting rear axle placement and achieving ideal suspension geometry after installing a suspension lift. Manufactured from 1.50" USA made DOM steel, this track bar significantly improves lateral stiffness and strength over stock to hold up to the abuse of large tires and aggressive offroad driving. Equipped with the Synergy Double Adjuster Sleeve and Pinch Bolt Assembly on one end, you don't even need to remove this track bar from the vehicle to make adjustments! We even topped it off with our maintenance free Dual Durometer Bushings to prevent any unnecessary noise or vibrations and provide unmatched ride quality. This track bar must be used in conjunction with the Synergy Track Bar Relocation Bracket or the Synergy Brake Line Relocation Bracket for best fitment.

Fitment:

Benefits: 

• Heavy duty 1.50" x 0.250 wall USA made DOM offers improved strength over stock and provides a stronger connection to the road, preventing unwanted vehicle wandering and unnecessary axle movement
• Centers the axle after installing a suspension lift to ensure proper suspension geometry, smooth handling, and consistent tire wear
• Fully adjustable without removing from the vehicle, thanks to our Synergy Double Adjuster Sleeve and Pinch Bolt Assembly
• Maintenance free Synergy Dual Durometer Bushings isolate noise and vibrations to provide a quiet, smooth ride and eliminate binding issues associated with stock vulcanized bushings
• No jam nuts that are impossible to keep tight
• Bent to clear most aftermarket differential covers with no additional lift height required
• Compatible with 35" spare tire due to high clearance design
• Limited Lifetime Warranty

Features:

• Engineered and precision bent from USA made 1.50 inch x .250 wall DOM tubing for maximum strength
• Compatible on trucks with 0-4" of lift with required track bar relocation bracket or brake line relocation bracket
• Two stage abrasion-resistant powder coat finish for maximum durability and corrosion resistance
• Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing mounting bolt
• Features Synergy Dual Durometer Bushings (DDB) with Teflon® bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
• 100 percent bolt-on components assures an easy, trouble free installation with the use of basic hand tools

Min/Max Length:
Measured in straight line from center of bolt hole to center of bolt hole

Minimum collapsed: 36.375"
Maximum extended: 35.50"

Includes:

(1) Synergy Heavy Duty Rear Track Bar
(1) Synergy Double Adjuster Sleeve
(1) Grade 8 Pinch Bolt Hardware Kit

Notes:

• One of the following parts are required for correct fitment:
  • 8740-01 - Synergy Track Bar Relocation Bracket
  • 8765-02 - Synergy Brake Line Relocation Bracket 

Installation Instructions

More information: www.p65warnings.ca.gov